المنتجات

Frame caps set for Ducati Streetfighter V4 machined from light alloy billet and then given an anodized surface finish. The kit consists of two plugs, supplied with specific screws for a precise and secure fixing on the larger front frame holes.

Frame Caps made in light alloy, machined from solid and then anodized. The kit consists of 2 sloping plugs, one for rear brake side and one for gear side.

Throttle tube version SPORT designed to eliminate the slop/play of the throttle control. Machined from solid and made of special plastic material, it allows the installation of our handgrips on motorcycles equipped with Ride by Wire electronic control. We recommend installation at a specialized workshop. Compare the outline of the original tube before proceeding with the purchase.

Fuel tank flange made in carbon fiber texture plain, available in matt or glossy finish; product in Carbon 100% with autoclave process, without modification replaces the original cap. The inner shell is made of Ergal with hard anodizing which guarantees the surface finish without scratches even after continuous contact with the gun when refueling. Notice: Fuel tank plugs are sold separately to give the opportunity to have the maximum functional and color customization TSU02 Fast Open plug TSU01 Key Lock plug

Fuel tank flange made in carbon fiber texture plain, available in matt or glossy finish; product in Carbon 100% with autoclave process, without modification replaces the original cap. The inner shell is made of Ergal with hard anodizing which guarantees the surface finish without scratches even after continuous contact with the gun when refueling. Notice: Fuel tank plugs are sold separately to give the opportunity to have the maximum functional and color customization TSU02 Fast Open plug TSU01 Key Lock plug

Tie rod kit for the rear suspension linkage made in light alloy, machined from solid and then anodized. The kit consists of two pieces that allow a lower seat height by 13 mm compared to the original tie rods. No modification is required for assembly, thanks to the supplied screws and nuts. Notice: The motorcycle on the side stand assumes a more vertical position with these tie rods. Pay attention when parking.

The radiator guard protects the delicate component from impacts with stones, animals or other. The guard does not reduce the functionality of the radiator. The fixing is, according to the models, with screws and / or zip ties, provided. There's no modification needed to fit the radiator guard. FITS ON DUCATI SCRAMBLER 800 Cafe Racer 2017 - 2018 - 2019 - 2020 - 2021 SCRAMBLER 800 Classic 2015 - 2016 - 2017 - 2018 SCRAMBLER 800 Full Throttle 2015 - 2016 - 2017 - 2018 - 2019 - 2020 - 2021 - 2022 - 2023 SCRAMBLER 800 Icon 2015 - 2016 - 2017 - 2018 - 2019 - 2020 - 2021 - 2022 - 2023 SCRAMBLER 800 Urban Enduro 2015 - 2016 Set is composed of 2 pcs.

Alloy rear wheel nuts CNC machined from light alloy billet and then given a coloured anodized surface finish. The nuts are designed to allow the use of the rear stand. Kit consists of 2 nuts. FITS ON DUCATI MONSTER 695 2006 - 2007 - 2008 MONSTER 696 2008 - 2009 - 2010 - 2011 - 2012 - 2013 - 2014 MONSTER 797 2017 - 2018 - 2019 - 2020 MONSTER 937 2021 - 2022 - 2023 SCRAMBLER 1100 2018 - 2019 - 2020 - 2021 - 2022 - 2023 SCRAMBLER 400 Sixty 22016 - 2017 - 2018 - 2019 - 2020 SCRAMBLER 800 Cafe Racer2017 - 2018 - 2019 - 2020 - 2021 SCRAMBLER 800 Classic 2015 - 2016 - 2017 - 2018 SCRAMBLER 800 Desert Sled 2019 - 2020 - 2021 - 2022 SCRAMBLER 800 Full Throttle 2015 - 2016 - 2017 - 2018 - 2019 - 2020 - 2021 - 2022 - 2023 SCRAMBLER 800 Icon 2015 - 2016 - 2017 - 2018 - 2019 - 2020 - 2021 - 2022 - 2023 SCRAMBLER 800 Urban Enduro 2015 - 2016 SPORT TOURING ST3 2003 - 2004 - 2005 - 2006 - 2007

ABS front or rear sensor protector made in light alloy, machined from solid and then anodized. Screw and mounting accessories are included. Designed for sensors with screw on right side. FITS ON DUCATI DIAVEL 1200 2011 - 2012 - 2013 - 2014 - 2015 - 2016 - 2017 - 2018 HYPERMOTARD 821 SP2013 - 2014 - 2015 HYPERMOTARD 821 2013 - 2014 - 2015 HYPERMOTARD 939 SP2016 - 2017 - 2018 HYPERMOTARD 939 2016 - 2017 - 2018 HYPERMOTARD Hyperstrada 821 2013 - 2014 - 2015 HYPERMOTARD Hyperstrada 939 2016 MONSTER 1200 R2016 - 2017 - 2018 - 2019 MONSTER 1200 S2014 - 2015 - 2016 - 2017 - 2018 - 2019 - 2020 - 2021 MONSTER 1200 2014 - 2015 - 2016 - 2017 - 2018 - 2019 - 2020 - 2021 MONSTER 797 2017 - 2018 - 2019 - 2020 MONSTER 821 2014 - 2015 - 2016 - 2017 MONSTER 937 2021 - 2022 - 2023 MULTISTRADA 1200 S GT 2013 - 2014 MULTISTRADA 1200 S Pikes Peak 2013 - 2014 - 2016 - 2017 MULTISTRADA 1200 S Touring 2013 - 2014 MULTISTRADA 1200 S2010 - 2011 - 2012 - 2015 - 2016 - 2017 MULTISTRADA 12002010 - 2011 - 2012 - 2013 - 2014 - 2015 - 2016 - 2017 MULTISTRADA 1260 S Pikes Peak 2018 - 2019 - 2020 MULTISTRADA 1260 S 2018 - 2019 - 2020 MULTISTRADA 1260 2018 - 2019 - 2020 MULTISTRADA 950 S 2019 - 2020 - 2021 MULTISTRADA 950 V2 S2022 - 2023 MULTISTRADA 950 V2 2022 - 2023 MULTISTRADA 950 2017 - 2018 - 2019 - 2020 - 2021 MULTISTRADA V4 Rally 2023 MULTISTRADA V4 S2021 - 2022 - 2023 MULTISTRADA V4 2021 - 2022 - 2023 SCRAMBLER 800 Cafe Racer 2017 - 2018 - 2019 - 2020 - 2021 SCRAMBLER 800 Classic 2015 - 2016 - 2017 - 2018 SCRAMBLER 800 Full Throttle 2015 - 2016 - 2017 - 2018 - 2019 - 2020 - 2021 - 2022 - 2023 SCRAMBLER 800 Icon 2015 - 2016 - 2017 - 2018 - 2019 - 2020 - 2021 - 2022 - 2023 SCRAMBLER 800 Urban Enduro2015 - 2016 SUPERSPORT 936 S2017 - 2018 - 2019 - 2020 SUPERSPORT 936 2017 - 2018 - 2019 - 2020 SUPERSPORT 950 S2021 - 2022 - 2023 SUPERSPORT 950 2021 - 2022 - 2023

ABS front or rear sensor protector made in light alloy, machined from solid and then anodized. Screw and mounting accessories are included. Designed for sensors with screw on right side. FITS ON DUCATI DIAVEL 1200 2011 - 2012 - 2013 - 2014 - 2015 - 2016 - 2017 - 2018 HYPERMOTARD 821 SP2013 - 2014 - 2015 HYPERMOTARD 821 2013 - 2014 - 2015 HYPERMOTARD 939 SP2016 - 2017 - 2018 HYPERMOTARD 939 2016 - 2017 - 2018 HYPERMOTARD Hyperstrada 821 2013 - 2014 - 2015 HYPERMOTARD Hyperstrada 939 2016 MONSTER 1200 R2016 - 2017 - 2018 - 2019 MONSTER 1200 S2014 - 2015 - 2016 - 2017 - 2018 - 2019 - 2020 - 2021 MONSTER 1200 2014 - 2015 - 2016 - 2017 - 2018 - 2019 - 2020 - 2021 MONSTER 797 2017 - 2018 - 2019 - 2020 MONSTER 821 2014 - 2015 - 2016 - 2017 MONSTER 937 2021 - 2022 - 2023 MULTISTRADA 1200 S GT 2013 - 2014 MULTISTRADA 1200 S Pikes Peak 2013 - 2014 - 2016 - 2017 MULTISTRADA 1200 S Touring 2013 - 2014 MULTISTRADA 1200 S2010 - 2011 - 2012 - 2015 - 2016 - 2017 MULTISTRADA 12002010 - 2011 - 2012 - 2013 - 2014 - 2015 - 2016 - 2017 MULTISTRADA 1260 S Pikes Peak 2018 - 2019 - 2020 MULTISTRADA 1260 S 2018 - 2019 - 2020 MULTISTRADA 1260 2018 - 2019 - 2020 MULTISTRADA 950 S 2019 - 2020 - 2021 MULTISTRADA 950 V2 S2022 - 2023 MULTISTRADA 950 V2 2022 - 2023 MULTISTRADA 950 2017 - 2018 - 2019 - 2020 - 2021 MULTISTRADA V4 Rally 2023 MULTISTRADA V4 S2021 - 2022 - 2023 MULTISTRADA V4 2021 - 2022 - 2023 SCRAMBLER 800 Cafe Racer 2017 - 2018 - 2019 - 2020 - 2021 SCRAMBLER 800 Classic 2015 - 2016 - 2017 - 2018 SCRAMBLER 800 Full Throttle 2015 - 2016 - 2017 - 2018 - 2019 - 2020 - 2021 - 2022 - 2023 SCRAMBLER 800 Icon 2015 - 2016 - 2017 - 2018 - 2019 - 2020 - 2021 - 2022 - 2023 SCRAMBLER 800 Urban Enduro2015 - 2016 SUPERSPORT 936 S2017 - 2018 - 2019 - 2020 SUPERSPORT 936 2017 - 2018 - 2019 - 2020 SUPERSPORT 950 S2021 - 2022 - 2023 SUPERSPORT 950 2021 - 2022 - 2023

Timing inspection cover CNC machined from light alloy billet and then given an anodized surface finish. Installation is simple with no modifications required.

Dedicated lever peg Sport for our "PRO" ( CNCRACING ) Rider control kit PEL01 - PEL02 - PEL03 - PEL04 - PEL05

Timing inspection cover CNC machined from light alloy billet and then given an anodized surface finish. The timing cover comes with the relevant O-ring. Installation is straightforward with no modifications required.

Side stand extension machined from light alloy billet and then given an anodized surface finish. Designed to provide the original kickstand with a larger surface to sit on for safer bike parking. The top bracket is made in S235JR steel to ensure maximum durability. Supplied already assembled with screws having a black galvanizing treatment to give aesthetic uniformity. The lower part has the characteristic of being reworked after anodizing, this step is very important to avoid that you can see staves or dents after placing it on the ground several times. This last aesthetic problem could happen if the stand base remained anodized on the underside as well.

Plates made of billet-machined aluminium and subsequently surface anodised. Designed to fill the screw's holes once you have removed the rear footrest pillion hangers, protecting them from water and dirt. The design of the plates is also studied to provide a fixing point for the straps during transport. On the Panigale and the Streetfighter E5 they can also be mounted as spacers on the rear brackets to allow a more comfortable position for the passenger thanks to their height of 18,00 mm. The kit consists of a pair of plates, screws and spacers for correct assembly in both modes.

Rubber keyring

Adhesive fuel tank protector pad for Ducati

Nuts ring gear CNC machined from light alloy billet and then given a colored anodized surface finish. Set is composed of six nuts. The nuts are not a replacement of the OEM but can be applied only on our REAR SPROCKET KIT; it consists of: - CUSH DRIVE HUB FLANGE - RING GEAR - NUTS

Elastic cover in cotton that protects the brake and clutch oil tanks and minimize fluid loss. It fits to the various dimensions of most of the factory and aftermarket liquid tanks.

Buffer rear wheel machined from light alloy billet with solid plastic heads. They protect the forks and swingarm in the event of spills or slides and give the bike more of a race-style design.

Folding footpegs universal machined from billet, with subsequent anodization of the surface. Derived directly from the collaboration with the teams of SBK and MotoGP on the race tracks, are excellent for improving grip and aesthetics of the bike. The manufacture make the footrest less slippery transferring security and tranquility in the guide. Kit consists of 2 pieces, left and right side.

Mirror blank covers made in light alloy, machined from solid and then anodized, designed to cover the holes when the bikes mirrors have been removed.

Handlebar clamp spacers having a height of 20 mm. made in light alloy, machined from solid and then anodized. The kit consists of two spacers and two special stainless steel screws. Installation is very simple and does not require modifications.

Oil pan protector made of light alloy, machined from solid and then anodized. On the Streetfighter the perfect geometry allows the assembly without practicing any type of modification. On the Panigale it is necessary to modify the lower part of the fairing. All the required hardware is included.